Witch´s cauldon / Halloween candy pot by New Axiom

New Axiom

Art>Other Art Models

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 10% infill

Designer

15.7 h

3 plates

5.0(10)

50% size, 0.2mm layer, 2 walls, 10% infill

Designer

5.1 h

3 plates

5.0(2)

Boost

123

208

122

116

Released

Description

Witch´s cauldron is a nice decoration with tea lights or a great candy pot for Halloween 2023!

Description:

This cauldron is designed for printing without an AMS. But of course you can use your AMS for this cool piece.

At first print the parts ring and two handles. I used 0-2mm layers. Support is for the rings required.
As second print the main cauldron. Attention: A print brake is necessary at layer hide 165mm by 100% scale and 82,6mm by 50% scale!
After the brake fit the ring on the cauldron.
Continue the print of cauldron.
As third print the cover, called slime. For better printing and to avoid a huge amount of support material, I recommend to cut the slime in two parts and glue them after printing.

As example see my uploaded 3mf file, called “cauldron_100%.3mf”.

Trick or treat and happy Halloween 2023!

Comment & Rating (22)

@dylan.gale77

This was one of the best 3d print files I have printed so far. Bambu Labs P1S with Overture Pla Plus Purple, Falshforge Burnt Titanium High Speed and ERYONE tri-extrusion green, blue, and red

The designer has replied

@NewAxiom

Great print. Thank you for sharing your pictures! The results are fantastic!

@dylan.gale77

Print Profile

0.2mm layer, 2 walls, 10% infill

Print went smoothly and turned out great!

The designer has replied

@NewAxiom

Great result! Also take a look at my other models.

@teammatthias

Print Profile

0.2mm layer, 2 walls, 10% infill

Wonderful Halloween make. the only issue is the 2-piece poison print, it isn’t very strong, or else I need better glue. I can’t take a star because this really is great and prints super! The articulated spiders are there for effect ~ LOL. Thank you for the cauldron.

The designer has replied

@NewAxiom

Thank you for sharing your print results. It looks really cool. The spiders go great with the witch's cauldron!

@TimBroddin

Print Profile

0.2mm layer, 2 walls, 10% infill

The designer has replied

@NewAxiom

Thanks for sharing your results. It´s really cool.

@pierce329

Print Profile

0.2mm layer, 2 walls, 10% infill

Don't be a ding bat and not read the instructions before you print. Pay attention this needs the accesories first and has a built in pause. It all makes sense when you think about it. I printed 100% size and it's nice.

The designer has replied

@NewAxiom

Thanks. ;) If possible, post pictures of your print. It would be great to see the results.

@pierce329

Replying to @NewAxiom :

You ask and you receive!

(Edited)

@tobias.kassebau

Print Profile

0.2mm layer, 2 walls, 10% infill

Absolut gorgeous! Printed like a charm and all the parts fit nicely!

The designer has replied

@NewAxiom

Thank you!

@teammatthias

Printing now; wish me luck! Thanks for the great model!

The designer has replied

@NewAxiom

Good luck ;) I´m sure, you will be successful. Please post pictures of your results.

@patrickh83

Print Profile

0.2mm layer, 2 walls, 10% infill

@garrett.hipple

Print Profile

0.2mm layer, 2 walls, 10% infill

@DillNye

Print Profile

0.2mm layer, 2 walls, 10% infill

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.