DIY Dual Color Filament 27g [NO AMS needed!]
Copyright Claim
DIY Dual Color Filament 27g [NO AMS needed!]
Boost
259
414
82
Print Profile(4)
★ 0.4mm nozzle, 0.2mm layer, 2 walls, 10% infill
Designer
56 min
1 plate
★ 0.6mm nozzle, 0.24mm layer, 2 walls, 10% infill
Designer
53 min
1 plate
0.2mm layer, 2 walls, 100% infill
1.2 h
1 plate
0.2mm layer, 2 walls, 10% infill
51 min
1 plate
Boost
259
414
82
0
510
314
Released
Description
You can print it with AMS like I did for convenience, but you could also just make the printer stop at the middle height and switch colors yourself.
This model makes about 27g of filament.
Comment & Rating (82)
All
This feels illegal. I'm going to try it, but if I don't update with a photo the filament police got me.
Update:
Escaped filament jail, made a sweet purple and red dual strand. I will print with this later today and add another pic.
This opens up a crazy world of custom options...
(Edited)
The designer has replied
10
Reply
😂😂😂
0
Reply
Replying to @DavidKrammer
It printed very well, but my purple and red became one uniform color. What an unexpected result, likely they are just a bit too similar so the effect is too subtle for my eye.
(Edited)
2
Reply
Print Profile
★ 0.4mm nozzle, 0.2mm layer, 2 walls, 10% infill
Tried this with Silk PLA, nice result! I'll try with different colours, this gold/silver transition is very loght
The designer has replied
2
Reply
This combination looks amazing! 😍
0
Reply
works great ! its amazing thanks you
The designer has replied
1
Reply
Love this combination!
0
Reply
Print Profile
★ 0.4mm nozzle, 0.2mm layer, 2 walls, 10% infill
nice idea thank you very mich!
The designer has replied
1
Reply
Thanks! Can't wait what you print with this red/green filament :)
0
Reply
Print Profile
★ 0.4mm nozzle, 0.2mm layer, 2 walls, 10% infill
used red and green PETG and in printed two of these little dragon keychains
0
Reply
Print Profile
★ 0.4mm nozzle, 0.2mm layer, 2 walls, 10% infill
i've also tried to Mix 4 colours which worked surprisingly good as well, with 0.12mm layer height
0
Reply
Print Profile
★ 0.4mm nozzle, 0.2mm layer, 2 walls, 10% infill
Orange and green creates a very interesting Shade of green.
0
Reply
Print Profile
★ 0.4mm nozzle, 0.2mm layer, 2 walls, 10% infill
Red/Green Combination
0
Reply
Print Profile
★ 0.4mm nozzle, 0.2mm layer, 2 walls, 10% infill
very good
0
Reply
Print Profile
★ 0.4mm nozzle, 0.2mm layer, 2 walls, 10% infill
Works!
0
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld