No Print Profile yet. Add one to earn points.
This is a model of a Haybot from scrap mechanic. You can adjust the pose of the model to whatever you want. I modeled this in Tinkercad using pictures of Haybots so it might not be exact to the model from the game. This is not an easy print most parts require support and have very small details. The fully assembled Haybot is around 6 inches tall but the height depends on the position you put it in.
Assembly
assembly is quite complicated but you can refer to the fully assembled model and the Tinkercad model here: https://www.tinkercad.com/things/iTE8jxreK5d. glue is required to hold the small details on but you dint have to glue all of the joints in place.
For the hay I lasercut some yellow paper
Non 3d printed materials
-Glue - any glue that sticks to 3d prints works I used ca glue
-Paint
-paper
What to print
LEG
Haybot leg 1 x2
Haybot leg 2 x2
Haybot leg 3 x2
Haybot leg 4 x2
Haybot leg 5 x2
Haybot leg 6 x2
Haybot leg 7 x4
Haybot leg 8 x4
Haybot leg 9 x2
Haybot leg 10 x2
ARM
Haybot arm 1 x1
Haybot arm 2 x1
Haybot arm 3 x1
Haybot arm 4 x4
Haybot arm 5 x1
Haybot arm 6 x1
Haybot arm 7 x1
Haybot arm 8 x1
Haybot arm 9 x1
Haybot arm 10 x1
Haybot arm 11 x1
Haybot arm 12 x1
Haybot arm 13 x1
Haybot arm 14 x1
Haybot arm 15 x1
BODY
Haybot body 1 x1
Haybot body 2 x1
Haybot body 3 x1
Haybot body 4 x1
Haybot body 5 x1
Haybot body 6 x1
NECK
Haybot neck 1 x1
Haybot neck 2 x1
Haybot neck 3 x1
Haybot neck 4 x1
Haybot neck 5 x1
Haybot neck 6 x1
Haybot neck 7 x1
Haybot neck 8 x1
Haybot neck 9 x1
Haybot neck 10 x1
Haybot neck 11 x1
Haybot neck 12 x1
Haybot neck 13 x1
Haybot neck 14 x1
Haybot neck 15 x1
Haybot neck 16 x1
Haybot neck 17 x1
Haybot neck 18 x1
Haybot neck 19 x1
Haybot neck 20 x1
Haybot neck 21 x1
HEAD
Haybot head 1 x1
Haybot head 2 x1
Haybot head 3 x1
Haybot head 4 x1
Haybot head 5 x1
Haybot head 6 x1
Haybot head 7 x1
Haybot head 8 x1
Haybot head 9 x1
Haybot head 10 x1
Haybot head 11 x2
Haybot head 12 x2
Haybot head 13 x4