A1 / A1 mini Poop Baffle 2 & Box by mail.iou

mail.iou

3D Printer>3D Printer Accessories

GIF

Print Profile(5)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Poop Baffle, 1 color, 0.2mm layer, 2 walls, 15% infill

Designer

25 min

1 plate

4.9(77)

Box 110x150mm, 0.2mm layer, 2 walls, 12% infill

Designer

2 h

1 plate

4.9(43)

Poop Baffle, 2 color with logo, 0.2mm layer, 2 walls, 15% infill

Designer

32 min

1 plate

4.8(46)

Box 90x150mm, 0.2mm layer, 2 walls, 12% infill

Designer

1.9 h

1 plate

4.9(27)

Click to see more

Boost

199

344

205

1.1 k

Released

Description

Print Filament:

PETG, ABS, and ASA are the best, and PLA+ is also acceptable.

If it is PLA, it may be deformed or sticky due to the heat of the filament.

This is a redesigned Poop Baffle, version 2 improved:
1. One-piece printing.
2. The hole and groove design is canceled on the poop impact surface, and it is changed to a solid one with raised groove lines to reduce poop rebound.
3. Added two new sizes of poop storage boxes (90x150mm, 110x150mm).

Print Filament:

PETG, ABS, ASA are the best, PLA+ is acceptable but may be deformed due to the heat of the filament.

Notice:
If you use a 90x150mm box, do not intersect the wall position of the box with the baffle to avoid collision when the Z-axis is lowered, as shown below:

Comment & Rating (205)

@nyerinsd

Print Profile

Poop Baffle, 2 color with logo, 0.2mm layer, 2 walls, 15% infill

The deflector plate is too vertical and close to the cutter. The purged filament stuck to the plate and piled up instead of dropping into a catch bucket. I really do like the logo inset.

(Edited)