Paper Bob-omb container Remixed by planpa3d

Remixed by

planpa3d

Art>Sculptures

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

4.5 h

3 plates

5.0(24)

[200%] 0.2mm layer, 2 walls, 10% infill

18.1 h

5 plates

5.0(1)

Boost

136

205

239

407

Released

Description

Created this design after seeing 3DTwinkie's Paper Bob-omb.

Absolutely wonderful idea and turned out great!!

This is more of a re-design than a remix, but I wanted to credit 3DTwinkie, as I love his ideas.

I wanted to create something similar where the bomb was a container of sorts and could easily be printed without supports.

With the right filament and printer set-up the seam or split in the bomb is barely visible, and looks like he is smiling.

The head can be positioned in three different orientations when attached to the bottom.

The rotation to unlock the container is opposite or “left-handed” threaded to confuse any unwanted persons from opening the container, but you can always mirror the bottom body and feet to correct this.

I included two different versions of the bottom bomb and feet. A running or standing version. Just make sure to print out the correct feet to align with the bottom bomb.

This version is a tad larger than the original design, I had to scale things up to get the twist locking design printing correctly with a 0.4 nozzle. So, I wouldn’t recommend scaling this design down, although it prints out great when scaling up.

Everything should load in slicer program in the recommended orientation to be printed without supports.

Thanks for checking out my design and happy printing!!

You can follow me on instagram,
https://www.instagram.com/pla.n.pa/
to find out what I designs I am currently working on

If your interested in selling prints of my designs, become a Patreon supporter here…
https://patreon.com/planpa3d

Comment & Rating (28)

@Dutch3d

Made some adjustments, printed at 220% Use print with fuzzy skin to get a more realistic flint

@sisco07

Boosted

do you have a print profile for that??

@Dutch3d

Replying to @sisco07 :

I lost the print profile :( You can print the flint using "fuzzy" mode in the slicer to get the same details if you like. I also did 2 color changes to get the burning details and to make the transfer of color not to hard i didnt flush any material so it changed color while printing. The key is lost forever

@takunrevolution

Print Profile

0.2mm layer, 2 walls, 15% infill

great design love it

@Cheddar

Print Profile

0.2mm layer, 2 walls, 15% infill

I added a touch of red painting to the fuse and it came out great. I didn’t have any issues printing or glueing them together.

@Lunabean

Print Profile

0.2mm layer, 2 walls, 15% infill

use fuzzy skit for the will. super realistic texture. also if you don't want thr lines on the lower half, print bottom separately. when it slows down for the eyes on the top half will put a "speed" line since it will slow down.