Bambu lab Waste bin X1C with see troughs and catch walls, (3 layer setting files and STL)
Copyright Claim
Bambu lab Waste bin X1C with see troughs and catch walls, (3 layer setting files and STL)
Boost
15
18
19
Print Profile(1)
0.28mm layer, 2 walls, 15% infill
Designer
4.1 h
1 plate
Boost
15
18
19
1
123
85
Released
Description
Simple and small model to safe space.
With see trough windows and catch walls (so the poop isn't falling over/behind the bin.)
3 bambulab studio files for 0.08 / 0.16 / 0.28mm layer thickness.
Comment & Rating (19)
All
Print Profile
0.28mm layer, 2 walls, 15% infill
This printed well but I was a bit sceptical at first as it's sides are so thin, but it fits nicely and does the job well.
0
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
It works fine!
But my print was not as stable as I expected.
As a waste bin it works great, and has a lot of room for the stuff.
The designer has replied
0
Reply
The walls are 1.0mm thick so yes not very stiff, but strong enough for the function, and faster print time and less filament needed.
0
Reply
Replying to @KoBuCRAFTS
Yeah thats the reason why it got 5 stars ;) Great work btw ;)
0
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
troppo fini lke pareti
The designer has replied
0
Reply
Please calibrate your filament first (flow), u should print this design without any problems.
0
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
absolutely no issues. prints nice and quick.
1
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
Amazing bin. Very light on material use and very fast to print compared to similar bins. Highly recommend as a first bin, but I feel it will just become permanent.
1
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
works well... would like to see the side bigger holding more and a slant pushing poop
The designer has replied
0
Reply
I will look if I can make one with your wishes :)
0
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
I only give it a 4 as the poop bounds in one corner and doesn't flow to the other side like another file I had. Great file, thin, and easy to print.
0
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
Good design, prints well.
0
Reply
Muito fina a parede, principalmente próximo do rasgo.
(Edited)0
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld