I have a P1S, but when I placed it in a cabinet I designed, the screen protruded because of size issues, preventing the cabinet door from closing. To solve this problem, I redesigned the screen bracket to raise the screen to fit the cabinet's dimensions. I have already set up manual supports for the model to make 3D printing easier.

When installing the new bracket, you need to follow these steps:

Remove the original screen bracket, taking care not to damage any cables or other components.

Thread the cables through the new bracket, ensuring the connections are correct and free from being pinched or strained.

Install the new bracket into the original mounting holes, making sure it is securely fastened in place.

Test if the screen functions properly.

我有一个P1S，但它放在自己设计的柜子中时，由于尺寸问题，原屏幕突出，导致柜门无法关闭。为了解决这个问题，我重新设计了屏幕支架，使屏幕上移，以适应柜子的尺寸。我已经为模型设置了手动支撑，以便容易进行3D打印。

在安装新支架时，你需要执行以下步骤：

拆卸原屏幕支架，确保小心不损坏线缆或其他部件。

穿线缆，将线缆穿过新的支架，并确保连接正确，不会被夹住或拉扯。

安装新支架到原来的孔位，确保它牢固地固定在那里。

测试屏幕是否正常工作。