MultiOpener.V2
Copyright Claim
MultiOpener.V2
Boost
42
90
16
GIF
Print Profile(2)
0.2mm layer, 6 walls, 25% infill
Designer
3.2 h
1 plate
0.2mm layer, 6 walls, 25% infill
Designer
1.5 h
1 plate
Boost
42
90
16
0
103
81
Released
Description
MultiOpener.V2 was designed for people who don't like cans and need help with opening them, so they don't hurt themselves.
I have incorporated a plastic bottle opener into the new version of this multipurpose
handheld device. If you don't have enough strength to open a plastic bottle, this Multiopener.V2 will help you open it. I designed MultiOpener.V2 so that it can open the available types of caps on plastic bottles.
It can even cope with the steel cap found on glass bottles.
Comment & Rating (16)
All
Print Profile
0.2mm layer, 6 walls, 25% infill
turned out good but to big for the water bottle cap
The designer has replied
0
Reply
I tested it on 5 sizes of bottle stoppers. it is possible that you have an atypical one that is slightly smaller. Have you tried with the smallest side of the multi opener and pressing harder on the opener to make the hole smaller for the bottle cap?
0
Reply
Replying to @Vozfrank
yes ive tried both sides but the water bottles we buy have a really small cap , but not your design fault , I will reduce it for my bottle size, thx for uploading ;-D
(Edited)1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
top
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
works great 👌
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0,2 mm Schicht 6 Wände 25% Füllung
hat sich auch gut drucken lassen 1A
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Printed well with PETG
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
good print
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
printed great. works very well
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
There are no related models yet
© 2024 MakerWorld