A1 MINI AMS TOP MOUNT / RISER - ONE PIECE Remixed by Spar-Fuchs24.de

Remixed by

Spar-Fuchs24.de

3D Printer>3D Printer Parts

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 4 walls, 15% infill

Designer

3 h

1 plate

4.8(20)

Boost

154

314

122

Released

Description

Deutsch:

Das ist ein Remix des A1 Mini AMS Risers.

Da ich das ganze etwas stabiler wollte (es wackelt doch sehr arg) habe ich mich ans CAD gesetzt und das Verbindungsloch entfernt und die zwei Teile zusammengefügt, somit hat man mehr Stabilität und es wackelt auch nichts mehr!

Edit 27.12.2023: HIER findest du die 10mm kürzere Variante (an einem Stück) die du auf dem A1 Mini drucken kannst.

Check das Video dazu: HIER

English:

This is a remix of the A1 Mini AMS Riser.

Since I wanted the whole thing to be a bit more stable (it wobbles a lot), I sat down at the CAD and removed the connecting hole and joined the two parts together, so you have more stability and nothing wobbles anymore!

Edit 27.12.2023: HERE you can find the 10mm shorter version (in one piece) that you can print on the A1 Mini.

Check the Video: HERE

Comment & Rating (32)

@ruttimam

Print Profile

0.2mm layer, 4 walls, 15% infill

Schade für den A1 Mini ist das Objekt leider 7 mm zu gross.

(Edited)

The designer has replied

@SparFuchs24.de

7mm? Mhh da kann ich doch bestimmt was machen :)

(Edited)

@SparFuchs24.de

https://makerworld.com/en/models/110341

(Edited)

@stevevu

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

printed great, wiring for my a1 mini combo to arrive!

The designer has replied

@SparFuchs24.de

Nice, looking very good! :)

@m.t.m.

Print Profile

0.2mm layer, 4 walls, 15% infill

The print came out perfect. The AMS mounts well and everything is securely attached to the A1 Mini.

@oppositor

Vielen Dank für die Stütze! Sieht echt top aus in einem Stück. Habe zwar für die längere Version hier nen Prusa genommen, aber das macht ja nix.

@twiddledup

I love this! Had been using the taller version, it was great to be able to print this one on the Mini. I wish mounting the AMS Lite on the A1 looked this good! I did add extensions (https://us.store.bambulab.com/products/ptfe-tube-connector) to the PTFE tubes, as the bend was pretty steep. I printed these PTFE tube guides as well (https://makerworld.com/en/models/138533#profileId-150889).

@kstudioca

I wish can print this, but it's too big for my A1 Mini bed 180mm3. I don't have a bigger printer, which is why the original design is a more suitable choice.

(Edited)

The designer has replied

@SparFuchs24.de

You could ask someone with a bigger printer to help you out. If you are located in germany I can help you out.

@SparFuchs24.de

https://makerworld.com/en/models/110341

@Gracin06

Print Profile

0.2mm layer, 4 walls, 15% infill

print works well!

The designer has replied

@SparFuchs24.de

why 3 stars only then? :D

@user_3056860258

Warning - Achtung I'm not sure it's related My printer is not yet 15 days old. I've gotten some probably unrelated issues, like the nozzle getting drowned in its purge. But the problems increased. It seems that the printer was impacting the print, I actually had a print with the first layer scraped by the head in certain places. Twice, last prints. (I also got tree supports broken while still attached to the bed, multiple times previously). Note that with this foot above, a few days ago I abused the fuzzy skin function in ultra-thin mode. Also once during a print, I had a PFTE cable get caught in spool 4. Honestly, be careful, I don't want that to happen to you. I opened a ticket and hope it wasn't related. Otherwise: This version is very stable, I didn't feel like I was losing quality. The three axes seemed to remain united while it was the feet which provided cushioning. However, I'm afraid that it may have distorted the vertical axis. Note that I have run it almost full time since I had it.