Long Reach Back Scratcher by MKCAMC

MKCAMC

Tools>Gadgets

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 4 walls, 15% infill

Designer

2.4 h

1 plate

4.8(26)

Boost

148

149

Released

Description

I made this long reach back scratcher out of necessity and wanted to share it with everyone. The pieces print on their side. Supports need to be used on the pin that fits into the slot for assembly. Supports can be used in the slot as well but that is optional. There is no need for supports anywhere else on this print. Assembly is easy. Simply apply glue into the slot on the upper scratcher and insert the pin on the handle. It also has a hole for a string to be tied through in order to hang it from a hook. Enjoy!

Comment & Rating (30)

@WiKKiD420

Print Profile

0.2mm layer, 4 walls, 15% infill

prints great,fit together great and works great

@gking360

Print Profile

0.2mm layer, 4 walls, 15% infill

Great print and feels sturdy when together

@michael.verlaak

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

nice design

@RedWizard

Agree it's on the fragile side, I was not careful enough when removing supports and it made the wall very weak. Scratches nicely, though.

(Edited)

@Mr.NoBuddy

Print Profile

0.2mm layer, 4 walls, 15% infill

a gift for my wife, she loves it, its just a little bit sharp on the edge

The designer has replied

@MKCAMC

I wanted to make sure it was good and scratchy. lol You can use a lighter to smooth the edges out if they seem to be too sharp.

@Mr.NoBuddy

Replying to @MKCAMC :

yes, i did use sand paper to round the edge a little bit

@devops_palmer

Print Profile

0.2mm layer, 4 walls, 15% infill

worked great for an itch I couldn't reach 🙂

@marrotteeric

Print Profile

0.2mm layer, 4 walls, 15% infill

A little on the fragile side. Might work a bit better if the join was a snap to hold it firmly. As it is the join is too loose.

(Edited)

The designer has replied

@MKCAMC

Mine is still going strong. 🤷🏻‍♂️If you glue the joint well it is plenty strong. I kept the design thin intentionally because it’s meant to use as little filament as possible. Just put glue on all sides of the connector before you insert it. My kids have even been playing with it and it hasn’t broken.

@user_1893917569

Print Profile

0.2mm layer, 4 walls, 15% infill

nice print works for me

@user_467237692

Print Profile

0.2mm layer, 4 walls, 15% infill

perfect!

@Heissbader

Print Profile

0.2mm layer, 4 walls, 15% infill

sehr schön um den Dackel aus der entfernung zu kraulen. für den eigenen rücken gehts aber auch 👍

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

cat paw - back scratcher

Kbfly

Soul Extractor - Head massager灵魂提取器

YSR

316

672

Long Nose Pliers

Wiseone

AMS Lite bowden clip. Long and bendy

chemlst