Nintendo Switch Game Card Palette Holder Card by Kim

Kim

Tools>Gadgets

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

1 Plate, X1 P1 & A1

Designer

2.1 h

1 plate

2 Plates, A1 Mini

Designer

2.4 h

2 plates

Single Plate w/ AMS - 2 Hr Print - 0.2mm layer, 3 walls, 15% infill

2.3 h

1 plate

4.7(13)

A1 Mini version. 0.2mm layer, 3 walls, 20% infill

2.7 h

3 plates

5.0(3)

Click to see more

Boost

224

239

219

Released

Description

Hello, fellow Nintendo Switch owners. This is a 2-hour print job that will hold up to 21 of your game cards. It consists of 4 parts: Top Card, Mid Card, Bottom Card, and a Pin. You can choose between a solid or 2-colour version of the top card. Assembly direction is included in the gallery. If you can do multi-material print, it will require 2 plates (versus 3).

I printed this on a Bambu Lab X1C + AMS so I am including the multi-material print file as well.

For remixers, .step files are available.

What you need:

2× M3×30mm screws
2× M3 Nut

You need to print the following:

1× Top Card
6× Mid Card
1× Bottom Card
1× Pin

Material: Use that PLA you bought 6 years ago. It'll be okay, just dry it first. Tested with ABS.

Print Settings:

Layer width: 0.4mm
Layer height: 0.2mm

Comment & Rating (28)

@user_1013152695

Very Good~

@richard.sikorsk

Print Profile

A1 Mini version. 0.2mm layer, 3 walls, 20% infill

schaut genial aus, man kann es sich schön nach Farben drucken

@HGang

Very useful! The games snap in perfectly and I no longer have to worry about the kids loosing the small games. Now we need more games to fill the slots.

@PCHuDSoN

Print Profile

Single Plate w/ AMS - 2 Hr Print - 0.2mm layer, 3 walls, 15% infill

you have done some smart things with the profile. personally I think a small prime tower for the lid would be ideal. also I only had m3x20 screws and the heads are a bit bigger so don’t fit flush but that good otherwise too long for 3 mid sections. thanks for providing the step, if I can be bothered later, I might change what I need on the lid or get longer screws. switch games fitted perfectly

@Oachkatzl

Several of the middle pieces broke trying to get them off the build plate. They are too thin.

@Maciz

Print Profile

Single Plate w/ AMS - 2 Hr Print - 0.2mm layer, 3 walls, 15% infill

Print quality was good, but the end unit is not as good as I hoped.

@Kimsun

Thank you for trying it out! I’d love to know what can be improved for future projects.

@Maciz

The nuts were a bit to tight, I almost had to melt them in. The opening for the screws was also to small. I had to drill them a bit wider in order for my screws to fit.

@Oachkatzl

Replying to @Maciz :

The holes are 3,2 mm in diameter - the screws 3 mm, usually a tiny bit less. Not the fault of the model, you are just overextruding.

@fab511

Print Profile

Single Plate w/ AMS - 2 Hr Print - 0.2mm layer, 3 walls, 15% infill

very good

@brireg

any chance you can slice this for the a1 mini w ams?

@yume.sanakan

Hi. I have an A1 Mini. So, I adapted the 3mf for our printer. I have uploaded the file.

@user_249932700

Print Profile

Single Plate w/ AMS - 2 Hr Print - 0.2mm layer, 3 walls, 15% infill

Printed perfect. Thanks!

@Van.Illa

Print Profile

Single Plate w/ AMS - 2 Hr Print - 0.2mm layer, 3 walls, 15% infill

Thanks !!

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(5)

Description

Comment & Rating (28)

License

Related Models

Harry Potter Nintendo switch Dock cover

Nintendo Switch Cartridge Holder

Block POW Nintendo Switch game cartridge holder

Nintendo JoyCon Earrings