Simple Y-Adapter AMS with threads inside (no tube-adapters needed)
Copyright Claim
Simple Y-Adapter AMS with threads inside (no tube-adapters needed)
Boost
59
120
30
Print Profile(1)
0.08mm layer, 2 walls, 15% infill
Designer
51 min
1 plate
Boost
59
120
30
0
277
257
Released
Description
simple y-connector without hose adapter. the hose is held by threads. enjoy!
update 2024-01-19:
i have changed the thread on one side to a left-hand thread. this means that the hoses do not have to be rotated during installation. it works best if the hoses are screwed in on both sides at the same time.
Comment & Rating (30)
All
Print Profile
0.08mm layer, 2 walls, 15% infill
Easier to install then I thought it would be, in my opinion it's a must have, thanks for the model, and I love that it doesn't need inserts, Thanks.
1
Reply
I take that back, when using the external spool with it my extruder made weird sounds. And after i removed it it sounded good again.
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
Nice👍🏻
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
nice
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
leider war mit dem Druck ein Loch zu klein geworden sodass das Teil unbrauchbar geworden ist
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
Best thing for my printer, love the ams. But hate to disconnect the tube! If you are into exotic materials it's a most 😁 the ams works like normal and easy to insert the filament when needed. Printed in pla by now, should print in PC to survive cf filaments. Time will tell ⌚cheers
0
Reply
Great, thank you.
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld