Christmas sled/sleigh kit card by PrintThatBoii

PrintThatBoii

Art>Other Art Models

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 15% infill

1.5 h

1 plate

4.6(9)

Ironing 0.2mm layer, 3 walls, 15% infill

2.7 h

1 plate

4.3(4)

Boost

116

141

116

Released

Description

This is an easy to print/assemble Christmas sled kit card. you can make it for your own or as a gift. I have both the kit card stl and the individual pieces for the sled available.

3D PRINTING:

I printed this one with a 0.3mm layer height, but if you want you can print it with 0.2mm or lower. I used 15% infill.

It fits on a 220x220mm print bed. If the slicer says that it doesn’t fit, just lower the distance between the part and the skirt. (I used 5mm)

ASSEMBLY:

Normally you should be able to put this kit card together without glue. All the parts snap together. you can break or cut the parts loose from the frame.

here is a video on how to put the kit card together:

Comment & Rating (14)

@darvil66

Print Profile

0.2mm layer, 3 walls, 15% infill

Facil y entretenido para montar con niños. Gracias por el aporte.

@metamorf85

Print Profile

0.2mm layer, 3 walls, 15% infill

(Edited)

@Danij017

Great model. Easy to print and assemble. If I had one suggestion, it would be to flip one of the sides of the sleigh. The way it is set up now, I was able to assemble it with the texture from the build plate out on every piece but the one side.