sign adapted from the model designed by @wakeandmake in Printables (https://www.printables.com/es/model/104119-use-the-force-wall-sign-and-keyring) to be able to print it in two colors in one coat using the AMS to achieve a professional finish. should be placed face down so that the finish on the visible side is the best and the PEI plate is recommended so that it has that rough appearance that hides the lines.
Instructions:
Layer height: 0.2
Top and bottom layers: 4-5
Walls: 3
Filling: 40% gyroid or similar
Supports: no
Weight: 66 grams of white and 18 of black including waste and purges
Material: Printing PLA is more than enough given the location where the sign will be placed
Printing time with Bambu X1C 0.4 nozzle: 2 hours and 25 minutes
Cartel adaptado del modelo diseñado por @wakeandmake en Printables (https://www.printables.com/es/model/104119-use-the-force-wall-sign-and-keyring) para poder imprimirlo en dos colores a una sola capa utilizando el AMS para lograr un acabado profesional. debe colocarse boca abajo para que el acabado de la cara visible sea el mejor y es recomendable la placa PEI para que tenga ese aspecto aspero que disimula las lineas
Instrucciones:
Altura de capa: 0.2
Capas superior e inferior: 4-5
Paredes: 3
Relleno: 40% giroide o similar
Soportes: no
Peso: 66 gramos de blanco y 18 de negro incluyendo los desperdicios y las purgas
Material: Imprimir PLA es mas que suficiente dada la ubicacion donde se va a poner el cartel
Tiempo de impresión con Bambu X1C boquilla 0,4: 2 horas y 25 minutos