Print Profile(3)
0.16mm layer, 2 walls, 15% infill
Designer
14.8 h
7 plates
Lid without Tree, 0.2mm layer, 2 walls, 15% infill
Designer
3 h
2 plates
drawer with multiple compartments, 0.2mm layer, 2 walls, 15% infill
Designer
2.4 h
1 plate
Boost
42
70
16
1
99
279
Released
Description
A jewelry box with a tree on which bracelets, watches, rings or earrings can be hung. The box can be extended to any number of levels. Simply print additional shelves and drawers.
When assembling, I recommend applying some glue to the centering pins.
I have printed the box in the photos with matt filament.
- I have added two more different lids for the jewelry box in the second print profile if you would like to print the box without the tree.
- And in the newest printprofile i have added another drawer with several compartments.
- update 28.02.2024 I have changed the geometry of the rods so that they fit a little better in the tower
Comment & Rating (16)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
Very nice design! Printed this as a gift for the daughter of a friend. The comment from @rotnam is correct ; the sticks are too amall and need to be scaled up. You may look into that.
Printed in eSun PLA+ pink and Sunlu PLA silk white.
The designer has replied
0
Reply
Thanks for the feedback, I will adjust the parts accordingly.
The box in the pictures is also very nice thanks to the silk material.
(Edited)1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
(Edited)
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
the horisontal bars are very loose. would have to make bars a tad thicker or glue them or stick something in that space. otherwise nice work!
The designer has replied
0
Reply
Hi,
It may depend on which material you use and with which printing parameters you print as the shrinkage is different. Especially if the bars and the tower are made of different materials.
You can try scaling the bars a little larger in the slicer
0
Reply
Replying to @Staprin3D
i made them from the same material. i will scale them a bit bigger for the next print
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Bei dem oberen Teil sind die Löcher für die Stangen viel zu groß
The designer has replied
0
Reply
Hallo, ich habe die Stäbe etwas dicker gemacht damit sie im Turm weniger Spiel haben, somit kannst Du die Stäbe nochmals drucken.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Love this model, printed a bunch of the base and top. The top snapped very easily at the connection. I re-printed with 4 wall loops and 40% gyroid infill. I also had to put 125% X and Z axis for the sticks, I left the the Y at 0% so they fit tight in the triangle. Still a really nice design. Thanks !
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
(Edited)
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld