NRL Lightbox - Roosters
Copyright Claim
NRL Lightbox - Roosters
Boost
7
6
4
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
4.4 h
1 plate
Boost
7
6
4
0
23
18
Released
Description
NRL Lightbox - Sydney Roosters
LED Used suggestion
You will need to put a hole either in the back or side for LED to come through, I drilled a 6mm hole.
Comment & Rating (4)
All
I've printed this and another one and both times the face is both too thin and the different colours on the face don't bind together. I'm new to 3d printing so I'm assuming there is an easy fix? The printer used is a Bambu Lab P1S and I printed it in PLA filament. Any advice on how I can make the face print thicker?
The designer has replied
0
Reply
did you change the settings as described in the print profile? this should give a good result. As a minimum try adjusting the initial flow rate to 1.04
0
Reply
I want to print this but I think it needs to have a base so it would sit level.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Other Issues:This sign looks fantastic however I had issues with the face thickness printing out too thin. I'm new to 3d printing so I'm sure this is a setting my side rather than a problem with the file.
0
Reply
No more
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld