Product Improvement: After extended use, I noticed that inserting and extracting capsules from the storage was cumbersome and complicated. Therefore, I thought of adding a component to make loading and unloading operations easier.
If you want to print the new component, here is its name: "Capsule Stopper-Extractor."
Hey there! Just recently got myself a new espresso machine, and let me tell you, finding a stand that matches its sleek design was no easy task. So, I decided to roll up my sleeves and put in some effort, and here's the result. I hope you all can appreciate it. Check it out!
The material used for printing is PETG.
The screws used are self-tapping M4 screws, 12 mm in length, as shown in the picture.
For the finishing touch, I sanded it with 120-240-400 grit sandpaper and then coated it with water-based clear paint.