Bambu Lab P1P/P1S/X1/X1C Anti Vibration Feet
Copyright Claim
Bambu Lab P1P/P1S/X1/X1C Anti Vibration Feet
Boost
576
1136
320
Print Profile(3)
0.20mm layer, 15% infill (Set of 4)
Designer
6.3 h
1 plate
0.2mm layer, 3 walls, 20% infill
2.2 h
1 plate
0.2mm layer, 2 walls, 15% infill - for printing with A1 mini
6.5 h
1 plate
Boost
576
1136
320
10
3 k
2.1 k
Released
Description
Perfect fitting antivibration feet printed in TPU with 15-20% infill for best results. No supports needed! Seems to help a good bit as well with the shaking/noise and a lot less printer wobble as well :)
Comment & Rating (320)
All
Pretty good! Glue the original Rubber Feets under this printed Feets for more anti vibration! Works well!
5
Reply
can you confirm if this improves print quality?
0
Reply
Replying to @c.Pain
Until he does, I see no reason to buy the Bambu AV feet.
0
Reply
Print Profile
TPU profile with 0.18mm layer height, shorter print time
freaking impossible to remove from build plate
0
Reply
@Joshua for the future, put it in the freezer for a while.
(Edited)2
Reply
Hairspray believe it or not.. The TPU comes right of the build plate.
(Edited)1
Reply
Replying to @lazorus123
Tysm, will definitely do that next time
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
Works great. A little stringing but thats normal with TPU. Now I need a new poop chute.
1
Reply
Came out wonderful on textured plate. Thank you!
To remove them simply a few drops of IPA (not beer) and they come off easily.
1
Reply
Print Profile
TPU profile with 0.18mm layer height, shorter print time
good model and especially helps to reduce noise and vibrations. I had a problem removing the needles from the PEI base (printing without glue), freezing in the freezer helped a lot
1
Reply
Print Profile
TPU profile with 0.18mm layer height, shorter print time
great print. I printed some for all my bambu printers and it has made a huge difference
1
Reply
Print Profile
TPU profile with 0.18mm layer height, shorter print time
printed in TPU. I had to clear some stringing since I printed all 4s at one, but other than that, it was perfect. the sound and vibration do get dampened a bit.
1
Reply
The print profile is no longer public
I printed the x4 version and there is stringing
0
Reply
Change the print settings from "by layer" to "by object"
(Edited)4
Reply
Print Profile
4pcs, 0.2mm layer, 3 walls, 20% infill
worked perfect. easy and good to print.
1
Reply
Boosted
Printed with PolyFlex TPU90. Fit amazingly well. It seems to have silenced a lot of the vibrations.
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
Related Models
© 2024 MakerWorld