This is a riser for the Creality K1, inspired by the speed and noise of the K1, I decided to call it Nu-K.

The riser is printer upright and with tree support for the grids.

The grids for the ventilation are with M3 screws and 12mm large. (was the one I got from Aliexpress). (You will need 18 u.)

To import the riser click in ignore when importing and then centre.

If you want to download the finished closed version the link is here:

https://www.printables.com/es/model/529879-d-riser-k1-creality

The corners for the riser are in this link:

https://www.printables.com/es/model/514703-nu-k-and-d-riser-corners

Note that I am uploading them separately to make it easier in case you decide to download both risers, you do not need to download the cores twice.

I only used 5% infill and 3 walls, but this is free.

If you like the riser please leave a like ;) its free.