100mmx100mm Celestial Space Cat Portrait
Hueforge Powered Filament Painting
Print Settings
.4 Nozzle
.08 Layer Height
First layer height .24
Arachne
1 wall
100% Infill
Aligned rectilinear infill pattern
Filament used
Polylite PETG
Slower speeds recommended for all types of filament used.
Recommend below 200mm/s for PETG
Below 300mm/s PLA
Based on the colors i used Black, Silver, Gold, White
Adjust as needed for desired results
Swap Instructions:
Start with Black
At layer #9 (0.88mm) swap to Silver
At layer #12 (1.12mm) swap to Gold
At layer #21 (1.84mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.