Kicky Door Stopper
Copyright Claim
Kicky Door Stopper
Boost
25
65
28
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
1.9 h
1 plate
Boost
25
65
28
1
139
161
Released
Description
Kicky Door Stopper is a print in place easily printable model that you can use to kick to hold the door in place and press and pull with foot to release.
No more struggling to remove the stopper after you firmly kicked it in place.
Remix possibilities:
Front wedge can be remixed with all kinds of possibilities that we can find to make it decorative.
Variations:
- Door Stopper - GGT.stl: Grooved Wedge, Grooved Base, with Text
- Door Stopper - GST.stl: Grooved Wedge, Smooth Base, with Text
- Door Stopper - SGT.stl: Smooth Wedge, Grooved Base, with Text
- Door Stopper - SST.stl: Smooth Wedge, Smooth Base, with Text
- Door Stopper - GG.stl: Grooved Wedge, Grooved Base, no Text
- Door Stopper - GS.stl: Grooved Wedge, Smooth Base, no Text
- Door Stopper - SG.stl: Smooth Wedge, Grooved Base, no Text
- Door Stopper - SS.stl: Smooth Wedge, Smooth Base, no Text
Printing Instructions:
- Material: Any (At least PETG preferable for durability)
- Infill: 20%
- Layer Height: 0.2mm
- Supports: No
- Rafts: No
- Brim: No
Comment & Rating (28)
All
Tried printing it on A1 mini but got something like this. Seems the thin part peeled of during printing with Fiberlogy Easy PLA :/ Other models printed with this filament are ok.
Maybe I need to use glue stick or add brim and/or raft?
Experienced similar problem with my own model, it's corner peeled of the sheet and deformed. So it would seem that the thickness of the part is to blame.
The designer has replied
0
Reply
@dominikz you probably need good bed adhesion. Keep in mind, if you use a brim, be sure to clean it up thoroughly as you need the springy action to be very responsive and not get stuck.
0
Reply
Replying to @Anefecious
Yeah, figured so 😀
Will try with glue and so on.
1
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
It is the best design that that I ever printed, it works flawless!
The designer has replied
1
Reply
@DedalusHunter Thank you for sharing your make. Thank you for the appreciations. I am happy that you liked it. Happy Printing!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
very nice design. but sometimes kicking is not working.
The designer has replied
1
Reply
@GallusDesign Thanks for sharing your make.
I need to improve it to add a sand paper or something to make the surface textured.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Product looks good only some waste in middle. Time will tell if the model will last.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Print profile and model are great. Printed in PLA but I would recommend printing in TPU as it otherwise slides very easily over wooden floors.
1
Reply
Boosted
The best design so far!
The designer has replied
1
Reply
Thank you @DedalusHunter
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Worked perfectly, even where other models didn't. This is a good ingenious model!
(Edited)The designer has replied
1
Reply
Thanks for the comment. I am glad you like it.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
awesome and cool
but unable to use it as my doors are too close to the floor
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great print!
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
awesome door stopper
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld