Hovering magnet Fidget Spinner
Copyright Claim
Hovering magnet Fidget Spinner
Boost
49
94
6
Print Profile(1)
0.16mm layer, 3 walls, 15% infill
Designer
1.7 h
2 plates
Boost
49
94
6
0
89
95
Released
Description
Hi…
i had a bunch of magnets laying around… So this came to life…
You need 32 6x3mm Neodyme Magnets (Had them leftover from my voron).
Make sure to insert top and Bottom Magnets the same direction and the wheel opposite.
Floats nicely and its easy to print.
Comment & Rating (6)
All
Print Profile
0.16mm layer, 3 walls, 15% infill
amazing idea!
The designer has replied
0
Reply
Thanks :)
0
Reply
this is SUPER clever. Not sure I have the magnets for it, but this is awesome!
The designer has replied
1
Reply
Thanks ;)
I bought 200 magnets from amazon for a few bucks. You can get them also cheap on aliexpress. I do more and more with magnets because ist easy to add and its better than most clicky connectors. I have small 5x3mm magnets - they are strong as f....nothing good :)
1
Reply
print pretty well
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld