The Aztec Treasure Jewelry Box by Kardes.Design

Kardes.Design

Household>Decor

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Small. 0.2mm layer, 3 walls, 15% infill

Designer

16.2 h

3 plates

4.8(10)

Large AMS X1/P1/A1 0.2mm layer, 3 walls, 15% infill

Designer

21.5 h

2 plates

4.5(19)

Loose fit Large lid 0.2mm layer, 3 walls, 15% infill

Designer

6.9 h

1 plate

[One color] Small A1 mini 0.2mm layer, 3 walls, 15% infill

10.8 h

3 plates

5.0(2)

Boost

310

527

468

275

Released

Description

This elegant and minimalist jewelry box is perfect for storing and displaying your favorite pieces. Its sleek design features subtle multi-colored accents that add a touch of playfulness to its modern aesthetic, while also paying homage to the rich cultural heritage of the Aztec civilization. Whether you're treating yourself or someone special, this box is a timeless and stylish choice.

Types:

Large: Approximately 200x105 mm. printable on the X1/P1/A1 series.

Smaller: Approximately 175x90 mm. Printable on the A1 Mini.

Divided/Undivided. (A1 mini divided version is slightly different)

Non AMS Multi part version coming soon.

Instructions:

Please use the provided print profiles.

Only the lid requires support.

If you choose to change anything please do so without changing the support settings.

I tested all support setting and found that using rectilinear interlaced top support interface allows the support to come off effortlessly.

Colors used:

Bambu Lab Purple Silk

Bambu Lab Pink Silk

Bambu Lab Gold Silk

Bambu Lab White Silk

Bambu Lab Onyx Black Sparkle

Bambu Lab Royal Purple Sparkle

Bambu Lab Gold Sparkle ( Limited edition holiday bundle)

Extra feature:

This lid design that is perfectly suited for an epoxy resin pour, allowing you to add a touch of luxury and personalization to your box. As shown in the image below, this added feature can enhance the overall aesthetic and quality of the box, making it a truly one-of-a-kind piece.

You can add glitter or a different color to the lid to enhance the look.

I will release more resin pour ready models soon.

If you choose to add an epoxy resin pour to your jewelry box, please be sure to follow all safety procedures and precautions. Working with resin can be hazardous if not done properly, so be sure to wear protective gear, work in a well-ventilated area, and follow the manufacturer's instructions carefully. Safety should always be your top priority when undertaking any DIY project, so take the necessary steps to protect yourself and others.

Commercial use license: Patreon

Hi, I'm a student and love creating functional and beautiful designs optimized for 3D printing.

if you like my work consider supporting me with these options:

Comment & Rating (58)

@3DFilmParts

Print Profile

Large AMS X1/P1/A1 0.2mm layer, 3 walls, 15% infill

Amazing Quality and the supports litterally came off perfectly smooth!!!

The designer has replied

@Kardes.Design

Thank you! I really appreciate the photos. I was surprised how well those support settings work! Rectilinear interlaced interface is perfect for large flat surfaces.

(Edited)

@3DFilmParts

Replying to @Kardes.Design :

Yes I was very surprised, it was so satisfying to remove. Love your work!

(Edited)

@Kardes.Design

Replying to @3DFilmParts :

Thank you!

@.s_.

Print Profile

Large AMS X1/P1/A1 0.2mm layer, 3 walls, 15% infill

it came out pretty good but i printed a little too fast and had some small defects. it probably would have been fine on sport but i used Ludacris lol. printed in cheap amazon silk pla. i thought the designs on the side were colored too but they arent. still looks amazing. 7.5 hours

The designer has replied

@Kardes.Design

Thanks for the photos! With silk I always slow it down. It came out looking fine though. I decided not to paint there to reduce printing time.

@JOHN.NICHOLS

Replying to @Kardes.Design :

it was real easy to paint those by not painting the the inlays.... Take the base filament what you want the inlays to be, then paint the entire surface the other color. aside from the handle it was one click on the bottom and like 3 for the top IIRC,

@.s_.

Replying to @JOHN.NICHOLS :

thanks for the painting tip! just printed another one but scaled the size different and added a heart knob on the lid. will share the print profile later when it gets done... (need photo or maker world lets idiots report the print profile)

@JOHN.NICHOLS

Printed out 2 of the large with dividers. I like how they turned out. Used sunlu pla+ in grey and black on both and white sunlu petg as an interface layer for the supports. I won't say the supports came out smooth but not very rough at all and came off in one piece with very few threads to clean up/off.

The designer has replied

@JOHN.NICHOLS

also made a double height one

@JOHN.NICHOLS

Replying to @JOHN.NICHOLS :

and triple

@Kardes.Design

Replying to @JOHN.NICHOLS :

HAHAHA This gave me a good laugh. thank you so much for the photos. i never thought about stacking them like that. are you using them for your self or are you gonna gift them?

@3DFilmParts

Also works when scaled down to print on A1 Mini. Filament Used eSun Copper Silk and eSun Black.

The designer has replied

@Kardes.Design

That's great! I didn't even test it that way. Because the other version was scaled down with the CAD software and the tolerance between the lid and box were adjusted there. Thanks a lot for trying it out and sharing the results and pictures!

@Frugalmac

prints great with superb quality and detail 10/10

The designer has replied

@Kardes.Design

Thank you for the feedback! I appreciate the picture!

@adrian1989

Print Profile

Large AMS X1/P1/A1 0.2mm layer, 3 walls, 15% infill

Ein sehr guter und sauberer Druck bis auf zwei Ecken. 👍

The designer has replied

@Kardes.Design

Thank you for your feedback. Corner lifting is a problem with large flat prints. The bed has to be clean and no cold wind drafts. I rounded the corners to help with adhesion but it still requires care.

(Edited)

@KingBot234

Boosted

Print Profile

Large AMS X1/P1/A1 0.2mm layer, 3 walls, 15% infill

I love the print. Used overture PLA and generic silk PLA. This was a gift for my mom, and she loved it. Thanks for the design!

(Edited)

@FuturePilot9758

Print Profile

Large AMS X1/P1/A1 0.2mm layer, 3 walls, 15% infill

Other Issues:This box is a really cool design and also a very good gift for family but the one problem I keep having is that one side of the base and the lid is lifted I don't know if its the model or my settings but other than that its a really good box.

The designer has replied

@Kardes.Design

Hello, I am sure that this issue is not caused by the model because I had the same issue when I started printing a few years ago. Which build plate are you using? Is the build plate washed? Printing large flat objects can bring adhesion issues that are not noticed with smaller objects. With less sharp edges. Also cold wind drafts can cause this as well. Please wash the plate, increase bed temp and close your windows. Let me know if this helps.

(Edited)

@edgaralvarado98

Print Profile

Small. 0.2mm layer, 3 walls, 15% infill

@JorgeRui

This intricately designed box is a true testament to your artistic prowess. With inspiration drawn from Aztec art is there and works nicely, the result is a box that not only exudes sophistication but also carries a cultural and aesthetic significance. Its exquisite design makes it an ideal choice for presenting a precious piece of jewelry, elevating the entire gifting experience. Moreover, the thoughtful craftsmanship ensures that it is not only visually stunning but also practical for the safekeeping of cherished items. Your dedication to creating a blend of cultural inspiration and functional elegance is truly praiseworthy. Exceptional work! Just need a velvet interior, and that can be made too. ;)

The designer has replied

@Kardes.Design

Thank you so much for your kind words! I worked a lot to try to improve it and make it easily printable by everyone. I actually did exactly what you said and added a valve finish for my wife's box! It's a great suggestion!

(Edited)

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(4)

Description

Comment & Rating (58)

License

Related Models

Treasure Chest

chest

Jewelry box , Earring Box , Schmuckschatulle

Butterfly Earrings