Hello there,

I propose you this useful Dyson Tube Holder that can be mounted on wall / Furniture

This improve system avoid clip that can damage the support and do a satisfying Clic

This model is for 40mm diameter tested on Dyson Tube (V8 for me but should work with every model where the tube is 40mm)

No support needed, can be print in PLA (will add my profil BBL Studio for strong part) or others your into.

On pictures i have Add EPDM tape to smoth the all things, your pick

If you don't use the profile be sure to put a least 4 walls loops and 20% infill to be strong enough

Usage :

1 - Print it

1bis - verify that the print is strong enough

1ter - add EPDM Tape like pictures or not

2 - put it in a wall with adequate fixation in fonction of your wall

3 - unclip the mechanism

4 - Clip you tube

Et Voila !

you can print more and put it at different places for conviniences

And yes,

by printing 2 of this you can also mount Light Sabers on a Wall just by clipping them (horizontal or vertical) test the diameter BEFORE!

OG @fns720

Don't hesitate to like and add to you collection then live a review after your print it ;)