敲一下就会發 键帽 FA KEY CAP

Copyright Claim

敲一下就会發 键帽 FA KEY CAP

Boost
78
172
14

Print Profile(3)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.08mm layer, 3 walls, 15% infill
0.08mm layer, 3 walls, 15% infill
Designer
34 min
1 plate
5.0(2)

适配键盘安装0.08mm layer, 3 walls, 15% infill
适配键盘安装0.08mm layer, 3 walls, 15% infill
32 min
1 plate

[A1 mini]0.08mm layer, 3 walls, 15% infill
[A1 mini]0.08mm layer, 3 walls, 15% infill
39 min
1 plate

Boost
78
172
14
0
487
25
Released

Description

祝大家新年行大运,打牌赢不停,亮牌杠上花,欢喜赢三家!!

设计灵感

源于中国麻将牌中的一张牌,牌面的图案为中文的發字,由于“8”和“發”在粤语里谐音,因此不少香港人认为8是一个吉祥的数字。经80年代以后影视媒体的渲染,加上在普通话和绝大多数汉语方言里都有这种谐音,因此,就有了这样的相似联想。所以这个字一般和8一起被称为吉祥数,意为发财、红火的意思。

应用适配

适用于cherry轴机械键盘

 

 

I wish you all good luck in the New Year,

play cards to win non-stop, show the cards on the bar,and be happy to winthe other three in mahjong!!

Design inspiration

It is derived from one of the Chinese mahjong tiles. The pattern on the card is the Chinese word "fa". Since "8" and "fa" are homophonic in Cantonese, many Hong Kong people think that 8 is an auspicious number. After the 1980s, the film and television media exaggerated it, and in addition to the fact that this homophony exists in Mandarin and most Chinese dialects, there is such a similar association. Therefore, this character is generally called an auspicious number together with 8, which means wealth and prosperity.

 

Application adaptation

Suitable for cherry axis mechanical keyboard

Comment & Rating (14)

Please fill in your opinion
(0/5000)

很有创意,但是那个安装不了,底座下面的孔比较小,而且那个孔座需要是那种的才能安装
The designer has replied
0
Reply
你拿刀修一下,扩大一点,每个材料收缩性不一样
0
Reply
这样打磨掉两边 挡住的地方就可以安装了,如果可以的话 作者可以尝试弄一个这个版本的安装孔座,匹配更多键盘。感谢作者
1
Reply
Replying to @Bluebox :
不是那个十字孔的大小,是两边的加强筋会干扰,你看我第二张图就知道了。他那个十字加强筋在下面的。
0
Reply
Print Profile
0.08mm layer, 3 walls, 15% infill
Very nice print, it just doesn't fit my key that well. But I can always stick this to an empty spot on the keyboard.
The designer has replied
0
Reply
If the hole below is a bit small, you can use a knife to repair it, expand the hole a bit, and then you can install it
0
Reply
作者的版本四周的補強肋會干涉按鍵本體安裝不上去,建議修改補強方式並且將中間安裝的十字結構改成圓柱中間十字孔強度會更好
0
Reply
将发那边作为底边,支撑会好拆很多…… 另外大佬的键帽尺寸哪里搞到的
1
Reply
我打印了两个都是拆支撑出问题,感谢提供思路!
0
Reply
谢谢,但是安装不了,孔有点小了
The designer has replied
1
Reply
你拿刀修一下,扩大一点,每个材料收缩性不一样
0
Reply
两条加强筋会干涉,需要改相下模型。
0
Reply
很棒的设计,自己打印改成红色的了!
0
Reply
Print Profile
0.08mm layer, 3 walls, 15% infill
0
Reply
No more