8Bit Legend of Zelda (Link) Light Box
Modeled in Fusion 360
I included two different back plates. The first has two holes and is for LED lights that are to be soldered in using an on/off switch, a DC power jack, and an AC adapter. That's how I build my light boxes. The switch hole is 8.2mm x 13.5mm. The DC power jack hole is 8mm. The materials I use for this are listed below. The second plate has a single generic hole 8mm x 16mm to be used with whichever lights you prefer. I chose not to include a hanging hole on this model as I've provided a base for it to sit on instead.
For the colors, I used the Bambu Green that came with my P1P, and Inland Chocolate, Sand, and Black.
V2 - I added a second print profile for “v2”. Version 2 has been scaled to near max bed size, as well as being a little thinner on the face so more light shines through. I recreated the holes on the two back plates so they are the same sizes as the original.
Feel free to use this as you see fit. Please don't sell the stl or 3mf files as I would like to keep them open and free. If you would like to sell the actual model, that's fine too, but I would ask that you consider buying me a coffee or something. My cashapp is $dejjen.
Amazon Affiliate links:
LED Lights - 12V: https://amzn.to/3uLFZ8t
On/Off Switch: https://amzn.to/3RlvX5M
DC power jack - female: https://amzn.to/3GDOgOg
AC Adapter - 110/220V to 12V DC: https://amzn.to/3RcgDbw