I have conjured up a little snow-covered hut.

Easy to print, no AMS necessary and beautiful to look at.

Simply place an electric tea light inside and it comes to life.

Basic settings

The first layer is always 0.2 mm high.

Infill for all parts 10% Gyroid.

Snow

Layer height: 0.12mm

Walls

Layer height: 0.2mm

Roof / Base

Layer height: 0.2mm

Chimney

Layer height: 0.16mm

Inlays

Layer height: 0.2mm

Small assembly instruction

The first step is to glue down all the snow.

Then glue the inlays to the inside of the windows.

It is important to pay attention to the corners of the upper windows,

otherwise there could be problems with the roof.

Now you can glue the walls together.

Now you can glue the chimney to the roof.

Once this is done, you can glue the roof to the rest of the house.

Only the base is not glued.

I hope you enjoy printing and building.