Now Released and more game surfaces to follow!
The goal of slingpuck is to be the first to shoot all your pucks into your opponent's camp! A simple 2 player game.
How to play
Rules:
- 1. Each player puts 5 pucks on their side.
- 2. The game is played with one hand.
- 3. Use the elastic to fire the pucks to the other side of the board.
- 4. Only one puck is moved at a time.
- 5. Slide both ends of the elastic band into the side grooves so that they snap into place.
- 6. As soon as the game starts, there is no pause allowed.
- 7. Whoever clears the board first is wins.
Important Rules;
- When the game starts, the puck cannot be moved to clear the way of pucks
- If a puck should fly out of the board, the game doesn’t pause and the player must go pick it up by himself.
Suggested print settings:
- 3 walls
- 10% infill
- 4 Top/Bottom layers (ironing is optional)
- supports are optional for the puck gate if you dont trust your bridging
Materials:
- One piece of 1.75mm to join the boards together
- 12 3x2mm magnets
- 300-350mm of 2.5-3mm elastic cord
Changes:
- added a rounded edge /w build in layers for easier coloring/painting on the STL file as well as BL 3mf file for easier access to the attached step files inside!
Full Ice Edition:
- Print a stick and smaller pucks and fight your way to the win the old school way! (Nets coming soon)
- Uses 3x2mm magnets which will hold the nets in place and challenge your friends to classic finger hockey!
Support:
- If you like my work and wish to help support me share and post about my designs or head over to my Cults3D or Patreon and purchase the files/subscription as well all money earned go back into my design and prototyping for new products for the community!
Revisions:
- Dec 9 - Added more tolerance for the hinge as some were having issues getting filaments through! Also added a hole cap to plug the holes between games to prevent pucks from escaping.
- Dec 27 - Added a non divider version and smaller pucks to really up the difficulty and versatility of the game