Hanging Hot Air Balloon - No Supports
Hanging Hot Air Balloon - No Supports
Boost
164
249
49
Print Profile(5)
Ballon Fragment (Print 6x), PLA, 0.16 mm layer, 2 walls, 15% infill, A1 Mini or larger
1.5 h
1 plate
Basket, PLA, 0.16 mm layer, 2 walls, 15% infill, no support, A1 Mini or larger
1.4 h
1 plate
0.16mm layer, 2 walls, 15% infill
55 min
1 plate
Shaft&Smooth Cap, PLA, 0.20 mm layer, 2 walls, 15% infill, support, A1 Mini or larger
44 min
1 plate
Click to see more
Boost
164
249
49
3
305
320
Released
Description
NO Supports! 9 pieces screw together to form this colorful model. Smooth cap also included.
Should all fit together smoothly. Cap goes on last and holds everything together.
Comment & Rating (49)
All
Print Profile
Ballon Fragment (Print 6x), PLA, 0.16 mm layer, 2 walls, 15% infill, A1 Mini or larger
Absolutely brilliant print. Printed one in 100% and two in 50%
100% was printet with 0.6 nozzle with 0.24 layer lines. Easy assembly!
50% was printet with 0.4 nozzle with 0.16 layer lines. Assemble was a bit harder to get it all screwed together for a snug fit.
The designer has replied
1
Reply
I did not think it would survive 50%!
0
Reply
Lovely🎈🪂
0
Reply
Replying to @TripleGWorkshop
It is a bambu, nothing holding it back. 😍
I did use some PLA+ for the screw parts. Not so sure how big of a difference it does in strength, but I was able to put it in a vise and slowly thread the cap on the "screw" without anything breaking.
(Edited)0
Reply
Love the print. Thank you!
2
Reply
Looks also great in 200% 😀
1
Reply
Massive!
0
Reply
Print Profile
Ballon Fragment (Print 6x), PLA, 0.16 mm layer, 2 walls, 15% infill, A1 Mini or larger
the print is top heavy & baskethas someweak points, cute idea
The designer has replied
0
Reply
what do you mean by heavy? it should be rigid. 🎈
0
Reply
Replying to @3DJupp
I know it hangs but I tried to stand it up and it fell over.
0
Reply
Boosted
Vielen Dank für die schöne Vorlage. 👍
0
Reply
Print Profile
Ballon Fragment (Print 6x), PLA, 0.16 mm layer, 2 walls, 15% infill, A1 Mini or larger
Printed at 150% with ASA. loved this model
0
Reply
Print Profile
Basket, PLA, 0.16 mm layer, 2 walls, 15% infill, no support, A1 Mini or larger
PARTS ALL FIT NICLEY !
0
Reply
Print Profile
Ballon Fragment (Print 6x), PLA, 0.16 mm layer, 2 walls, 15% infill, A1 Mini or larger
THIS PRINT WAS SO MUCH FUN !
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Perfect, just needed the Cap.
0
Reply
Print Profile
Basket, PLA, 0.16 mm layer, 2 walls, 15% infill, no support, A1 Mini or larger
love this model.
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld