Wine Bottle Holder

Wine Bottle Holder

Boost
908
1574
117

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

Light Version: 0.2mm layer, 2 walls, 8% infill
Light Version: 0.2mm layer, 2 walls, 8% infill
Designer
15 h
1 plate
4.8(49)

Strength Version - 0.2mm layer, 3 walls, 20% infill
Strength Version - 0.2mm layer, 3 walls, 20% infill
Designer
28.9 h
1 plate
4.9(12)

Boost
908
1574
117
7
1.5 k
394
Released

Description

 

 

Elegant Wine Bottle Holder for Your Kitchen Counter

 

This wine bottle holder is the perfect addition to your kitchen, providing a stylish way to keep your wine bottles easily accessible and organized on the table.

 

Space-Saving: The compact wine bottle holder takes up minimal space on your kitchen counter while offering a tidy storage solution for your wine bottles.

 

Aesthetic Design: With its timeless and elegant design, the wine bottle holder seamlessly fits into any kitchen decor, adding a touch of sophistication to your space.

 

Secure Storage: The horizontal supports ensure that your wine bottles stand securely and stably, without wobbling or tipping over.

 

This wine bottle holder is not only functional but also an attractive centerpiece. It offers a stylish way to have your favorite wines within reach when you're ready to enjoy them.

 

Print your wine bottle holder today and add an elegant touch of organization to your kitchen counter!

 

Thank you, friends!
It's impressive to observe your creativity and see how you apply your design and talent. For those who still want to print the model, I've summarized the great results you've shared in the comments here. I hope that others will be inspired by your designs, color choices, and material selection.

 

Print and Design by @katharina.struc
Print and Design by @cbougerie
Print and Design by @Ccb045
Print and Design by @GHOSTELEVEN
Print and Design by @Ratler
Print and Design by @tturns27
Print and Design by @engintakmork
Print and Design by @adzamper7117
Print and Design by @EngGraph
Print and Design by @Skovgaard
Print and Design by @jacob.simmons52
Print & Design by @AndyF_CH

 

Print & Design by @surpriselady320
 

Comment & Rating (117)

Please fill in your opinion
(0/5000)

Boosted
Awesome model 🤗
The designer has replied
3
Reply
Very Coool! Thank's for sharing!
1
Reply
ist wirklich eine schöne Arbeit. Danke dafür
The designer has replied
1
Reply
Hallo Katharina, vielen Dank. Sehr schönes design, super Farbwahl! Viel spaß damit! Gruss
0
Reply
Habe mal eine Frage zu dem Modell: Gibt es Einschränkungen in der Stabilität bei z.B. einseitiger Verteilung der Flaschen oder vollem Halter (4 Flaschen)?
0
Reply
Replying to @MasterPrinter :
Hallo Janek, ich selber habe nur die Light Version gedruckt, damit getestet, Egal welche Stelle ich Flaschen platziere ist mir der Halter nicht umgekippt.
0
Reply
Absolutely beautiful design thank you so much, I'm thinking about giving this one away and making a pearl version for my white wine and a burgandy for my red wine, but I love how it looks! I printed the new light version and noticed zero issues, saved on filament and it feels nice and strong.
The designer has replied
3
Reply
Thank you for your feedback and for sharing your experience and picture from your final product. Great Job!
0
Reply
Print Profile
Light Version: 0.2mm layer, 2 walls, 8% infill
Sehr schönes Model. Dankeschön 🙏🏼
The designer has replied
1
Reply
FCK...... jetzt muss ich nochmal drucken. Weiß mit schwarzer Streifen sieh mal richtig hammer aus . Danke für die Bewertung und die Bilder, und viel Spaß damit. Zur Info, schau nächste Woche wieder vorbei, werde für den Ständer einen Beleuchtung ADD-on veröffentlichen.
(Edited)
1
Reply
Replying to @EngGraph :
Nice werde ich machen. Der Streifen ist nicht schwarz sondern mit dem 3DJake magicPLA Deep Space gemacht. Sieht Live besser aus. :)
(Edited)
1
Reply
Print Profile
Strength Version - 0.2mm layer, 3 walls, 20% infill
The designer has replied
4
Reply
Very Nice! Thank you for your feedback!
(Edited)
1
Reply
Print Profile
Light Version: 0.2mm layer, 2 walls, 8% infill
Really an eyecatcher!
The designer has replied
1
Reply
Thank You!
0
Reply
ABSOLUTELY BEAUTIFUL!!! Printed with Silk PLA copper and PLA+ for the black accents. 15hour print time on P1S. And Oh my goodness! Thank you for sharing this model!
(Edited)
2
Reply
Print Profile
Light Version: 0.2mm layer, 2 walls, 8% infill
I made it with several colors going from clear to Gold and then black and Grey. spaced patterns. I really love this.
The designer has replied
1
Reply
Very Cool!
(Edited)
1
Reply
Print Profile
Light Version: 0.2mm layer, 2 walls, 8% infill
using for coffee cup storage
The designer has replied
1
Reply
Very cool ! Thank you for your comment and rating!
(Edited)
1
Reply
Print Profile
Light Version: 0.2mm layer, 2 walls, 8% infill
this came out really great!
The designer has replied
1
Reply
Thank you for your feedback and for sharing your print. Very Cool!
0
Reply

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.