A new indoor glider design with a canard wing. The benefit of this design is that both wings (canard and main wing) provide positive lift.
In a classic design, the stabiliser in the back has to produce negative lift to stabilise the aircraft.
It's an easy and quick print, less than 10 minutes in PLA or PETG.
Removing the print from the plate is where you need to be carefull and take your time.
With PLA, mine came out at 3.7 grams.
Out of the printer, your glider should be slightly nose heavy, ajust the flaps on the canard downwards to adjust (just a little, as shown on the picture).
Please rate, it's beneficial to everyone.
Happy printing😋
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.