Engine Benchmark Test

Its an easy benchmark to get functional with the Bambu Printers and perfect for any Automotive Enthusiast

Prints Perfect with PLA and PLA+ and takes about 45 Mins to print.

The Profile below requires no support and includes all the proper settings to test the following below.

The model includes 20 Tests. A comprehensive set of 3D printing tests, including channels, holes, embossments, bridging, overhangs, ribs, and dimensional stability evaluations like warping, arching overhangs, and bed adhesion, ensures the printer's capabilities across a diverse range of challenges.

1. 0.7mm channel through crankshaft

2. 1.2mm channel to cooling chamber

3. 1mm hole in vertical plane

4. 0.3mm Embossed hex

5. 1mm hole in horizontal plane

6. 0.5mm hole in horizontal plane

7. 20mm Bridging

8. Freestanding overhang

9. Freestanding pipe

10. Thin ribs

11. 0.5mm holes close to build surface

12. 0.86mm embossment at 5 degrees

13. Detailed embossment

14.Cooling chamber/internal surfaces

15.Valve pockets / Vertical resolution

16.Radius

17.Warping test

18. Arching overhang (10mm Radius)19.Bed adhesion

20. Elephant footing test (base hole 0.5mm, chamfering: 0.8mm,

0.5mm, 0.3mm, 0.1mm, 0mm)

The Original File can be found here: https://www.thingiverse.com/thing:4575774

The Creators Youtube Video of the model can be found in the link above