A cutout style of Marcie from Charlie Brown. She is 450mm tall (~18") and has a stand to hold her upright. She prints in different parts so that she can fit on a 250x250 build plate and is held together using pegs that are also printed. Marcie is part of a Charlie Brown Christmas set that my family created for the Christmas season.

The idea for this cut out was to have Marcie tangled in the lights and Peppermint Patty yelling at her. The Peppermint patty cutout can also be found on my profile.

• Requires a 2 AMS system at minimum to print in full color.
• The base color is black and colored sections are printed on top of the black base.
• The skin color is from Sunlu along with the black, yellow, pink, orange, gray and blue.
• Red is from MatterHackers
• Green is from Bambu.
• Brown is from Polymaker.

Requires a 2 AMS system at minimum to print in full color. Some of the plates that include lights have 9 colors. To get around this with a 2 AMS system I just paused the print at layer 50 and changed out the black for gray. After layer 49 black is no longer required. Also the colors sit on top of a black background so if there are any colors you can not print you can print them separate and glue them on top.

Each color is a different STL file incase you wanted to print them separate and glue them on. Also the bambu slicer like to choose other color for the top infill the shine through the top color. The only way I found to fix this is the have each color its own STL file.

If you are customizing the print make sure you have at least 6 solid layers for the surface so the the infill pattern does not show through.