RC 1/10 Toyota Ae86 Thunder Initial-D

Bodywork based on the Toyota Ae86 Trueno Initial-D

Minimum print area tested 220 x 220 x 250 mm / 8,6" x 8,6" x 10,6" inches.

The design only includes the bodywork of the RC 1/10 Toyota Ae86 Trueno Initial-D

You can use a printable chassis:

Thanks to dukedoks, this bodywork is compatible with your Chassis: https://cults3d.com/:458084

Some modified parts of the original dukedoks, this bodywork is compatible with your Chassis: https://cults3d.com/:458084 chassis need to be printed to properly fit this body

Visit other designs by designer dukedoks.

RC 1/10 Dodge Challenger:

https://cults3d.com/:590117

*use authorized by dukedoks

You need:

-85- M3 or 1/8 in. screw maximum length 12 mm**

-8- M3 or 1/8 in. screw maximum length 20 mm**

-2- M3 or 1/8 in. screw maximum length 40 mm**

-4- X4 - Round magnets 12 x 3mm / 0.47 x 0.12 inches

The use of adhesive can be helpful with small parts.

Assembled Size:** Assembled Size:

Length: 420 mm

Width: 197 mm

Height: 136 mm

Approximate wheelbase: 240 mm

The pieces for the front and rear lights have space for 2 leds of 5 mm each.

Each file has been checked in "ultimaker cura" and "PrusaSlicer", but if you find errors, please feel free to contact me

Detailed assembly

https://skfb.ly/oQn7A

Use 0.12 or 0.08 mm on "chrome" and decorative pieces

Recommended use of Supports in the recommended position (parts are located)

The 8% gyroid infill

0% Flexible Tires

Supports: Yes