Well, as some of you requested, here I bring you a color version of the brothers. It has not been easy to achieve a result that I consider acceptable, anyone who has worked with HueForge knows that it is not easy to control to his liking, especially for a 4-color print.
Well I hope that after so many hours of testing you like the result!!
Feel free to share your results!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Protopasta Soda Green Transmission Distance: 16
PLA PolyLite Red Transmission Distance: 1.5
PLA Protopasta White Transmission Distance: 3
Swap Instructions:
Start with Charcoal Black
At layer #11 (0.96mm) swap to Soda Green
At layer #18 (1.52mm) swap to Red
At layer #29 (2.4mm) swap to White for the rest.