thx for that very cool design. love it. I made a really big one 😉 printing another one for white wine 😀

AustrianBossfan

0.2mm layer, 2 walls, 15% infill

Looks like we Austrians are all alcoholics ;-)

Yop1403

This was a major project! Thanks so much for sharing your model!

It will be placed on a rolling cart in a closet, so I used various brands and colors of PETG. I made two modifications to the original.
I created some strips, that I glued on the back, to stop the bottles from going all the way through.
One of the ends wasn't touching and didn't want the bottle just hang, so I created a footing piece.
I created both modifications in the slicer, if you can believe it. LOL

PLAboyPrtz

Do you have the model of the footing piece?

Tobias279

I published the footer piece. Just flip however you want it.  Hope it works for you.
The Infinite Wine Rack Footer Remix Remixed by PLAboyPrtz - MakerWorld

dewgenenny

liberi.leonardo

jlbrugger

Mate! Thank you for the photo, looks really awesome!! 

wow! that’s super awesome 🙌 thank you so much for sharing this literally made my day 💪😎

my first big project and I love it.  I did use some WD40 spray to make it easier to pt together.

user_2618543068

Printed at 106% to fit larger bottles. Easy and solid assembly.

Ironblue

Love this model! Made a few tweaks to the profile and shared it.

Great design and print quality. Fits most bottles. Mine has been fully loaded for a few days, nice and sturdy. 

The Printsmith

Printed with Bambu Lab A1 Mini and PLA-filament

Do.Minika

maximilian.schweiger98

IMG_0723.JPG

IMG_0722.JPG

IMG_0728.JPG

IMG_0723.webp

IMG_0733.webp

plate_1.webp

plate_2.webp

plate_3.webp

plate_1.png

plate_2.png

plate_3.png

2024-02-25 10.00.28_4bf9a7b2-eb78-45b2-9528-ec08094836a7.webp

2024-02-25 10.00.18_834f12ca-6955-42f3-8253-280228cd340a.webp

2024-02-25 10.00.12_1cde363d-e58c-4ce7-9a3d-dfee195a3df6.webp

Auf 99.5% verkleinert

Auf 99.2% verkleinert

I printed this in PETG, 0.6mm nozzle, 0.3mm layer and it turned out great.With the original settings (transferred to my settings) the inside and outside connectors had to be put in place, using a hammer (with the danger to damage the printouts). Further I am considering to extend the wine rack - this is probably difficult if the connectors can't be removed without a pair of pliers.So I scaled:<ul><li>The inside connector to 99.5% (only the 2 short sides, not the long side. It still is very firm in the hexagon ring with this setting)</li><li>The outside connector to 99.2% (only the 2 short sides, not the long side. The outside connector still sits in place firmly enough but can be removed easily if the wine rack is being extended)</li></ul>Love this model!

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Love wine? Love 3d printing? &nbsp;Then this is the print for you! The Infinite Wine Rack is a modular wine rack that you can print and grow to your hearts desire. &nbsp;The design is made up of three parts only - <ul><li>Hexagonal Ring - two needed per wine bottle, one for front and one for back</li><li>Inside Connector - needed for joining two rings together and extending the wine rack</li><li>Outside Connector - needed for joining two rings together but not extending</li></ul>The parts pressure fit together so that you most likely don't need to glue. At least, I haven't had to but YMMV.&nbsp;If you print this and it's useful to you I'd love you to share a make and photo :) &nbsp;&nbsp;

Print Profile(2)

Description

Comment & Rating (70)

License

Remixes (2)

The Infinite Wine Rack Footer Remix

Modular Wine Rack

Related Models

infinity cube

Infinity cube 3

The Infinite Wine Rack Footer Remix

Earring organizer | Earring rack | Earring holder