A very poor remix of Thrutheframe’s magnetic chute cover/poop bin

https://www.printables.com/model/244789-bambu-lab-magnetic-chute-cover-and-poop-management

isittoLoud’s friend’s butt

https://www.printables.com/model/364103-that-friends-butt-revised

and

fiveiron's toilet planter

https://www.printables.com/model/224939-toilet-planter/files

Someone asked for it, so I’m delivering.

The first Bambu X1 butt poop chute cover/toilet poop bin. Low poly cause this is art and to deter (or possibly excite) the pervs. I’m a noob at creating these, so please keep that in mind if theres any issues.

There are 2 versions of toilet one for those with chutes underneath, and another version with the hole in the bottom filled In.

Uses 6x3mm magnets, not sure if it'll actually hold the extra weight, but the chute cover press fits pretty well into the poop chute so i think it'll hold, pictures were taken without magnet in there.

I printed the butt cover upright with tree supports touching build plate only and supporting critical areas. Supports ended up being really easy to remove.

The toilet was printed with no supports, a few areas inside could of benefited but from the outside you cant see where it was stringy.

One strange issue and i’m not sure if its just my printer or filament, i had to turn off the spaghetti detection or around 40-60% it would erroneously detect spaghetti and pause the print resulting in layer shift. This occurred twice not sure if it was a random event as it didnt actually have spaghetti.

Both printed on bambu x1c in pla.

By downloading or printing you do so at your own risk, as this is really a novelty created more for laughs than functionality. i have not tested it other than a quick print and fit.