A simple narrow spool holder thats customisable in length and fits on a narrow shelf

Why?

I wanted to use one of the many other awesome designs but they were all a bit over engineered for me and a model i tried was far too deep for my 185mm deep shelves. I also wanted a holder I could push back against the wall on the shelf and not have the spools hitting the wall everytime I placed them.

Specs

• Fits on a 185mm Deep Shelf
• Suits 15mm (1/2inch) PVC with OD of 21.4 (Pressure or Elec Conduit) - Available at Hammer Barn in Australia
• OR
• 20mm (3/4inch) PVC with OD 26.8mm (Pressure or Elec Conduit) - Available at Bunnings in Australia
• Use whatever length you like! 580mm Lengths worked pretty well for 8 Spools for me.
• Designed to push up against a wall on a shelf and keep the spools away from the wall.
• Included a small test piece to check tube size before commiting to the print. Can then scale the model as appropriate.
• Less than 80g of plastic to make.

More to Come

Happy to add custom sizes on request. (Tube size or Depth for shallower shelves)

*On the 2 sizes of pipe I had to test on, the OD varied along their length so I highly recommend printing the test pieces first and adjusting the scale of the model accordingly.