Bambu Lab Filament Labelling System.

This product is intended for use with Bambu Labs refill filament spools.

It allows you to rewind any other brand of filament onto a Bambu reusable spool and label it accordingly.

The most popular brand labels and filament types are included, as well as blank labels so you can add your own text!

Features:

• Simple click in place design. No glue or fixings needed.
• Label any brand of filament and material type.
• Indicator windows showing 800g, 600g, 400g, 200g to show you when you are running low on filament.
• Can be printed in multiple colour combinations.
• AMS compatible with less than 2mm total protrusion from the spool.
• Labels slide firmly in place to avoid any risk of falling out during use or in storage.
• A blank Label template is included for you to add your own text.
• Pre supported. A small tab of support will come off the back plate. This is to ensure the red marker around the weight guide is printed cleanly.

Making Your Own Labels:

• Import the blank label into your design software of choice.
• Add any name or text you like and emboss it onto the top surface of the blank label.
• The height of the text should be no more the 0.24mm - This allows a full 2 layers of text, on top on the blank label.
• I suggest a letter size of 4.5mm for most brand names/filaments
• The top and bottom labels are not the same. The text needs to be printed on both sides of 2 separate label templates. (Copy and mirror it in your 3D software and then add text to both top surfaces.)

Tip: Turn on ironing for the very top layer to give a nice glossy finish to the text.

Printing:

Designed to be printed at a 0.12mm layer height with a filament change at:

• layer 9 for the labels
• Layer 5 for the back-plate

The included print profile contains multiple plates with everything you need to get started. This includes colour changes and the correct print settings for a nice result.

Removal:

Gently ease up each corner of the back-plate until it pops off.

You may snap a mounting peg or 2 but these can be easily removed from the spool by poking a piece of filament though the holes

The back plate can be glued in place for a permanent fix to the spool. Good If you're constantly changing spools and don't want any risk of dislodging the back plate from being chucked around.

Thanks for looking! :)

Please post your makes for others to see and have fun labelling all those rolls of ‘unknown’ filament :P