Woodstock Christmas Ornament
It´s Cute.
It`s Yellow (and Red).
Hang on your Tree (Profile 1 with Hanger)
or use as Display (Profile 2 with Base/Stand).
145x80mm approx.
5-Color Filament Painting.
AMS-ready for one AMS.
Important: Please change your Filament in AMS-Slot 1 to White after Black completely finished printing (both Profiles).
For Use without AMS:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Dark Red
At layer #13 (1.12mm) swap to Orange
At layer #19 (1.6mm) swap to Lemon Yellow
At layer #26 (2.16mm) swap to Ivory White for the rest.
For Profile 2: Please print the Base/Stand on Plate 2 in White.
Have Fun and Happy Printing!