This is an insert for the board game Return To Dark Tower. This insert supports Alliance and Covenance expansions (and 4 small miniature towers from the Dark Horde expansion).
To be able to use this insert, you might need to either discard the original insert, which comes with the game, or make some modifications to it like I did (see my pictures).
This print will require a ton of filament, so feel free to adjust the infill percentage. I used the default 15%, but 10% or 5% would be fine too.
The white trays in my pictures are trays that can be utilized during gameplay. Black Trays are supposed to be kept inside the box, you only need them during game setup.
The card tray does support sleeve cards. I am using the official sleeves from the publisher, which are very thick.
The Character Tray has slots for characters' specific items.
All the white skulls are kept inside the drawstring pouch.
Please let me know if there is anything that needs to be improved, or if you have any questions. Thank you very much for checking my models and happy printing!!