Original Source Material:
- Original Low-Poly Squirtle Model: Agustun Arroyo on Printables.

Please support this designer! Thank you for your work!

Description:
A remix model from the famous Low-Poly Squirtle, now made ready for Multipart Printing. I have scaled alle the parts to 200%, as I think a Squirtle should be a little bit bigger! This Squirtle is about 10 cm tall.

I have edited the following on the original model, to make it better suited for multipart printing:
- All parts have be scaled up to 200%.
- Parts are sorted by color on different plates, which makes for easy printing.
- There was a edge removed/edited on the arms part as this was giving me problems with the assembly.

- The original parts had the head & feet parts in 1 STL file. I have splitted these parts for easier printing.

I also did the following:
- I used a 0.16 settings basefile I like and edited it.
- I adjusted the flowrate in my settings profile to keep the color the same as best I can.
- I put ‘Ironing’ off in my settings profiles, since this would give coloring differences, most notable in the brown shell part.

If there are more suggestions for better settings, please upload them!

Please note!: The Beige Body Part needs supports activated to have a good print. I was unfortunaly not able to print this part without having issues if supports were deactivated. All the other plate printed fine without the use of supports.

The color sorting in the 3fm-file is based on the following filament that I used for this print:
- Beige: eSUN PLA+ Beige.
- Blue: eSUN PLA+ Light Blue.
- White: eSUN PLA+ Cold White.
- Brown: eSUN PLA+ Brown.

Please note!: eSUN is currently switching to Carton Spool Holders if you want to print from the AMS-System. I used the ‘old’ plastic filament spools which I currently still have.