Manual reel for fishing by hand, compact and very practical design, it has holes to insert your fingers and hold it firmly to wind the line. in the center a fastening hole for fishing with a bow or slingshot, on the edges 3 small holes to hook the hook or for passive fishing, a loop is passed through the hole and tied to a flexible tree branch to cushion the pulls. Inspired by a commercial model that I saw on a friend some time ago in a survival course, it is very light and takes up very little space, making it ideal to always carry with you on outings to the sea or mountains.
Instructions:
Layer height: maximum 0.2, recommended 0.16
Top and bottom layers: 4-5
Walls: minimum 2 but recommended 3
Infill: 35-44% gyroid or similar, but 100% recommended because there is no great difference in time and it improves remarkably.
Design to not require supports
Weight: 40 grams approximately
Material: it is recommended to print in PETG, ASA or ABS because it will be in continuous contact with humidity and the sun. but we have tested with PLA and it complies for a long time
Printing time with Bambu x1: 1 hour
----------------------------------------------------------------------------------------------------------------
Carrete manual para pesca a mano, diseño compacto y muy practico, tiene agujeros para meter los dedos y sujetarlo firmemente para enrollar el sedal. en el centro un orificio de sujeción para pesca con arco o tirachinas, en los bordes 3 pequeños agujeros para enganchar el anzuelo o para pesca pasiva, se hace pasar un loop por el agujero y se ata a una rama de un árbol flexible para que amortigüe los tirones. Inspirado en un modelo comercial que vi a un compañero hace tiempo en un curso de supervivencia, es muy ligero y ocupa muy poco espacio por lo que es ideal para llevar siempre encima en las salidas al mar o montaña.
Instrucciones:
Altura de capa: máximo 0.2, recomendable 0.16
Capas superior e inferior: 4-5
Paredes: mínimo 2 pero recomendable 3
Relleno: 35-44% giroide o similar, pero recomendable al 100% porque no hay gran diferencia en tiempo y mejora notablemente.
Diseño para no necesitar soportes
Peso: 40 gramos aproximadamente
Material: recomendable imprimir en PETG, ASA o ABS porque va a estar en contacto continuo con la humedad y el sol. pero hemos probado con PLA y cumple durante mucho tiempo
Tiempo de impresión con Bambu x1: 1 hora 18 minutos