Lightsaber (collapsible) by Stefan Heer

Stefan Heer

Props & Cosplays>Replica Weapon

GIF

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

Part3-Light-0.2mm layer, 2 walls, 15% infill

Designer

2.6 h

1 plate

5.0(2)

Part1-Handle-0.2mm layer, 3 walls, 25% infill

Designer

3.5 h

1 plate

5.0(1)

Part2-Top&Bottom-0.2mm layer, 3 walls, 15% infill

Designer

2.1 h

1 plate

Part4-Capholder-0.2mm layer, 6 walls, 25% infill

Designer

22 min

1 plate

Boost

123

130

Released

Description

For my prototype I printed all elements individually and also made some multicolor prints. But you can also print everything out at once.

The lightsaber blade can be extended with one slash. The blade can be secured with a cap. With the blade extended, this cap can be clamped onto the rebel symbol (M8 screw). I cut the M8 thread in the handle with a tap. But I also attached the file for gluing. The lightsaber has a total length of approx. 1050 mm.

In general, this lightsaber offers a few possibilities for crafting.

Have fun with it and may the force be with you.

Comment & Rating (5)

@iyule00

How to emit light？Can you provide the circuit plan？

The designer has replied

@StefanHeer

Hi I used an old diving light. Nova Light - Scubapro. But you can also use others. Maybe you need to modify it a bit or make an adapter. The Light can have a size of Ø35.5x121mm. I made another one, but I'm selling this one for a small fee on Cults. https://cults3d.com/en/3d-model/fashion/lightsaber-of-guardian-collapsible-stefka This lightsaber I made for a light you can buy vor $2 on TEMU.