Wanted a dock for our families Disney Magic Bands to make charging and storage easier. Designed this to house the chargers and a slim 4 port USB dock so they could all plug into it and charge.

The Dock can't measure any more that 5 mm tall and 30 mm deep or the USB for the chargers won't be able to plug in and slide into place. I used this one from Amazon: Amazon.com: Anker 4-Port USB 3.0 Hub, Ultra-Slim Data USB Hub with 2 ft Extended Cable [Charging Not Supported], for MacBook, Mac Pro, Mac mini, iMac, Surface Pro, XPS, PC, Flash Drive, Mobile HDD : Electronics

I know it says it doesn't charge, but I can confirm from the two that I have it pushes enough juice to charge an iPad, my logitech headphones, and these three watches with no issues. It is NOT a fast charger for the iPad though.

The slots for the band chargers is tight and they won't fall out, but pulling the watches without pressing the release clips will pull them out. Mine are superglued in as this will be their forever dock/home.

*Added a single and double band version. NOTE: the USB dock WILL NOT fit in the single version, but you don't need one anyway. It WILL fit in the double version.

Very minimal support needed as it prints on its side.

Hope it helps someone! Thanks!