Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic rosso Transmission Distance: 5
PLA BambuLab Basic grigio Transmission Distance: 0.5
PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to rosso
At layer #22 (1.84mm) swap to grigio
At layer #27 (2.24mm) swap to White for the rest.