Darth Vader Helmet by PAPA Emeritus IV

PAPA Emeritus IV

Art>2D Art

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.08mm layer, 1 walls, 100% infill

Designer

2.8 h

1 plate

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.48mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5.1

Swap Instructions:
Start with Black
At layer #2 (0.56mm) swap to Blue
At layer #5 (0.8mm) swap to BambuLab Green
At layer #11 (1.28mm) swap to Jade White for the rest.

Comment & Rating (3)

@Toro66

This says to start with black but when I do, the print has the background in blue instead of black. Any ideas what I might be doing wrong?

The designer has replied

@PAPAEmeritusIV

When you go to print the file you will come to the screen PREPARE TO PRINT in the handy app. You will see a Filament Assignment spot and you will need to match the colors in the AMS slot to the color shown. So lets just say the Black is Filament Slot one, you will just click the color and select black. I will add a photo as well of what I am talking about

@PAPAEmeritusIV

picture