Worked Well on the A1. Thank you!

Okay, for those like me, loading the 3mf file and having a sliced version not showing the temperature change, here are the steps to do it : 1) Click on slice 2) Go to Preview 3) Using the slider on the right, move down the upper one to the first layer at 215°, then right click on the plus button, choose "Add G-Code" and add this : M109 S215 Do that again on each starting zone when the temperature change, and change the "S215" part to the desired temperature in celcius.

Interesting approach to best set the temperature.

Doesn't work. Downloaded the PLA_calibration_set_temp.3mf, double-clicked on it, clicked on Slice, then go to the temperature view, it shows the same print temperature.

temp changes 👌👍 nice model 👍