Bambu X1C Exhaust Flange (left/right exit) with AMS Hub
Copyright Claim
Bambu X1C Exhaust Flange (left/right exit) with AMS Hub
Boost
32
67
5
Print Profile(1)
0.24mm layer, 3 walls, 15% infill
Designer
5.1 h
1 plate
Boost
32
67
5
0
60
11
Released
Description
I wanted an exhaust flange that would exit left and work with an AMS hub. This exhaust flange is designed to work with 3" pipe, I used semi rigid dryer duct. I hope you can use this model as much as I do! Comment, Like, & Share please.
This exhaust flange is designed to exit left or right.
I used small adhesive window foam to seal against the printer. It Is not required but highly suggested.
I used 3x metal pan Phillips screws #4x3/8" and one M3x10 screw to replace the outer factory screw.
Comment & Rating (5)
All
Hi, very interesting project...but the connection tube (3") is too big for my needs, it is possible to do it with an output with a diameter of 0.90" (approx 23 mm diameter) ? , so you can use a classic vacuum cleaner hose with an internal diameter of 25 mm. Tell me what you think of my idea thanks
The designer has replied
1
Reply
would you be needing left hand exit or straight out.
0
Reply
I could try if you would like. DM me.
0
Reply
Replying to @AdvantageousCre
Yes, with the exit on the left as in the photo you posted in the project it would be perfect
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution
© 2024 MakerWorld