Chinese Dragon Lantern / 中国龙灯笼

A modern traditional Chinese dragon lantern that's easy to print and assemble and will look great around the home. Great print for Chinese New Year, the year of the Dragon.

Once printed and assembled simply place an LED tea light onto the base plate and fit the frame over the top.

• Slide both the diffuser and dragon style panels into the rails on each side of the frame.
• The frame decorations are optional but can be blued onto the frame as pictured below should you choose to use them.
• The lid can be pushed into place and will remain in place, however can be glued if preferred.
• No supports are required for this model.
• Plate glue recommended to ensure good adhesion.

现代传统中国灯笼，易于打印和组装，在家中看起来很棒。

打印和组装后，只需将 LED 茶灯放在底板上，然后将框架安装在顶部即可。

• 将扩散器和龙式面板滑入框架两侧的导轨中
• 框架装饰是可选的，但如果您选择使用它们，可以在框架上涂上蓝色，如下图所示
• 盖子可以推入到位并保持在原位，但如果愿意，可以粘上
• 此模型不需要支撑
• 建议使用板胶，以确保良好的附着力